Search results for "Unbaffled Stirred Vessel"
showing 8 items of 8 documents
Mixing dynamics in uncovered unbaffled stirred tanks
2014
Abstract The present work is aimed at providing experimental information on mixing rates in an unbaffled vessel under free surface vortexing conditions. The planar laser induced fluorescence (PLIF) technique was used for measuring the dispersion dynamics of a passive tracer over a vertical section of the vessel. In agreement with the quite scant literature information available for these systems, results confirm the existence of two well defined, partially segregated, zones that give rise to a double mixing dynamics behavior. A suitable mixing time definition is proposed and applied to a number of experimental runs with different stirrer geometries and agitation speeds. Results confirm that…
Free-surface shape in unbaffled stirred vessels: Experimental study via digital image analysis
2013
There is a growing interest in using unbaffled stirred tanks for addressing a number of processing needs such as low shear damage (sensitive biocultures), low attrition (solid–liquid applications), deep-cleaning/sterilization (pharmaceutical applications). The main feature of uncovered, unbaffled stirred tanks is highly swirling motion of the fluid that results in a deformation of the free liquid surface. At sufficiently high agitation speeds the resulting whirlpool reaches the impeller and gives rise to a gas–liquid dispersion, so leading to the formation of a dispersion without the use of gas-sparger; the so-called self-inducing operation of the vessel. In this work, digital image analysi…
Free vortex shape in Uncovered Unbaffled Stirred Tanks (UUST) agitated by Rushton turbines
2012
The main feature of unbaffled stirred tanks is the highly swirling liquid motion, which leads to the formation of a central vortex on the liquid free surface, when the vessel is operated without top-cover (Uncovered Unbaffled Stirred Tanks, UUST). In this work, original data on fluid dynamics characteristics of (UUST) agitated by a Rushton turbine are presented. In particular, digital image analysis is employed to accurately assess vortex shape and validate an original model for its description. The model describes vortex shape in the case of sub-critical systems (when vortex bottom is placed above the impeller plane) as well as in the case of super-critical systems (when vortex bottom fall…
POWER CONSUMPTION IN UNBAFFLED TANKS: SUB AND SUPER-CRITICAL REGIMES
2013
Unbaffled stirred tanks are increasingly recognized as a viable alternative to common baffled tanks for a range of processes (e.g. crystallization, food and pharmaceutical processes, etc) where the presence of baffles is undesirable for some reason. Also, in the case of bioreactors for animal cell cultivation, where cell damage is mainly related to bubbles bursts at the air –liquid interface, unbaffled tanks have been shown to be able to provide sufficient mass transfer through the free surface vortex. As a consequence bubble formation and subsequent bursting is conveniently avoided (Scargiali et al., 2012). The same feature clearly makes unbaffled vessels potentially advantageous for any f…
Power Consumption in Uncovered Unbaffled Stirred Tanks: Influence of the Viscosity and Flow Regime
2013
Notwithstanding the increasing industrial interest toward unbaffled tanks, available experimental information on their behavior is still scant, even for basic quantities such as the mechanical power drawn. In this work, the influence of the Reynolds and Froude numbers on the power consumption characteristics is presented for unbaffled stirred tanks operating both in nonaerated conditions (subcritical regime) and in aerated conditions (supercritical regime), i.e., when the free surface vortex has reached the impeller and the gas phase is ingested and dispersed inside the reactor. Experimental results obtained at various liquid viscosities show that power numbers obtained in subcritical condi…
Oxygen Transfer Performances of Unbaffled Bio_Reactors with Various Aspect Ratios
2014
Cultivation of microorganisms, plants or animal cells requires liquid agitation in order to ensure oxygen and nutrient transfer and to maintain cell suspension. Many studies on animal cell damage due to mechanical agitation and sparging aeration have shown that mechanical damage of freely suspended animal cells is in most cases associated with bursting bubbles at the air–liquid interface (Barrett et al., 2010). Gas bubbles are usually generated by direct air sparging aimed at supplying oxygen to the culture medium. Mechanical agitation may also introduce gas bubbles in the culture medium via vortexing entrainment from the free surface. In this work oxygen transfer performance of an unbaffle…
Solid–Liquid Suspensions in Top-Covered Unbaffled Vessels: Influence of Particle Size, Liquid Viscosity, Impeller Size, and Clearance
2014
Particle suspension in liquids is a unit operation commonly encountered in the process industry. Although it is usually carried out in baffled stirred tanks, there are some specific applications where the presence of baffles may be undesirable. In the present work solid-liquid suspensions are investigated in a radially stirred unbaffled tank provided with a top cover. The minimum impeller speed at which all solid particles get suspended (Njs) and the relevant power requirements (Pjs) are assessed. The dependence of these two parameters on physical properties (liquid viscosity, particle concentration, and size) and system geometrical configurations (impeller diameter and clearance) is invest…
Vortex shape in unbaffled stirred vessels: experimental study via digital image analysis
2011
There is a growing interest in using unbaffled stirred tanks for addressing certain processing needs. In this work, digital image analysis coupled with a suitable shadowgraphy-based technique is used to investigate the shape of the free-surface vortex that forms in uncovered unbaffled stirred tanks. The technique is based on back-lighting the vessel and suitably averaging vortex shape over time. Impeller clearance from vessel bottom and tank filling level are varied to investigate their influence on vortex shape. A correlation is finally proposed to fully describe vortex shape also when the vortex encompasses the impeller.